TAPP Water EcoPro - What our filters remove

TAPP Water EcoPro has been tested and certified to remove more than 100 contaminants from tap water. The products is designed to be used with public tap water where the water is microbiologically safe and has been adequately disinfected. Our independant lab tests are defined on this basis. 

TAP Score by SimpleLab 

SimpleLab is one of the top water labs in the world based in San Francisco, California. They score tap water and filtered water on a scale from 0-100. TAPP Water EcoPro achieved a top score of 98

NSF Standard Testing

The product has been tested according to NSF/ANSI Standard 42 (Aesthetic Effects) and Standard 53 (Health Effects) 

NSF/ANSI 42 - Aesthetic Effects 

TAPP Water EcoPro has been tested according to NSF/ANSI Standard 42 for the reduction of the following substances. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system.

Contaminant % Reduction Influent challenge concentration (mg/L unless specified)  Max permissible product water concentration (mg/l unless specified)
Chloramine > 97.5% 3.0 +/- 10% 0.5
Chlorine 99%
2.0 +/- 10%
> or = 50%
Particulate Class II >99% At least 10,000 particles/mL > or = 85%

 

NSF/ANSI 53 - Health Effects

TAPP Water EcoPro has been tested according to NSF/ANSI Standard 53 for the reduction of the following substances. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system.

 Contaminant % Reduction Influent challenge concentration (mg/L unless specified) Maximum permissible product water concentration (mg/L unless specified) 
Alachlor*
>98% 0.050 0.001
Atrazine* >97%  0.100 0.003