
Reverse Osmosis Benchtop Water Filter
- 99% PFAS removal · lab tested
- >99% fluoride removal · only RO can do this
- 100% lead, mercury & bacteria removal
- 7-stage filtration with Swedish remineralisation
- No plumbing · plug in and pour
Description
The Tappwater Reverse Osmosis Benchtop Water Filter removes 99% of PFAS, more than 99% of fluoride, and 100% of lead, microplastics and bacteria from Australian tap water. It is one of the only water filters sold in Australia that publishes its full independent lab results, tested by Equinox Labs and Laboratorio Echevarne.
It needs no plumber and no installation. Fill the 3.2L tank with tap water and seven filtration stages, built around a reverse osmosis membrane with 0.0001 micron pores, purify it into the front jug. It plugs into a normal power point, which makes it the practical choice for renters and apartments where under-sink systems are not an option.
It also replaces the kettle. Choose room temperature for drinking, 85°C for preparing baby formula, or up to 95°C for tea and coffee, in preset volumes of 150mL, 300mL or 1L. Press once and walk away.
The water tastes different from other purifiers, on purpose. Most reverse osmosis systems strip everything out and leave water tasting flat. Ours adds calcium and magnesium back through Swedish mineral rock as the final stage, so it drinks like premium mineral water.
One thing to know before you buy: it dispenses room temperature and hot water, not chilled. For cold water, keep the removable 1.2L jug in the fridge.
What this filter removes
80+ contaminants in total, independently tested by Equinox Labs and Laboratorio Echevarne. The good minerals go back in: the final stage adds calcium and magnesium from Swedish mineral rock.
See the full lab table →Dimensions
- 30cm tall × 22cm wide × 35cm deep · about the size of a coffee machine
- Fits under overhead cupboards on a standard kitchen bench
- 3.2L tap water tank in the back, 1.2L pure water jug in the front · both removable
- 2150W when heating · the same draw as a kettle, minimal on standby
How does it work
The concentrate (the water carrying what was removed) stays in the back tank. You tip it out when you refill. About 3 litres purified for every 1 litre discarded.
Watch it pour →What's included
- The purifier · digital display, hot & room-temp dispensing
- Your first year's cartridge: the 7-in-1 filter ships pre-installed (up to 12 months / 1,200L). Then $199.99 once a year. The filter light tells you when, no subscription
- 3.2L tap water tank and 1.2L pure water jug
- Countertop cover, pure water outlet and drip tray
What it's made of
We thought long and hard about this one. No one hates microplastics more than the people who built a machine to remove them, so here is the honest answer on materials.
There is no such thing as a plastic-free water purifier. The reverse osmosis membrane itself is a polymer, and even "plastic-free" kettles run water past polymer seals. The real question is which materials touch your water. We chose the safest available: premium PEX piping, 100% bisphenol-free (BPA, BPS and BPF) and rated for high temperatures, the same pipe technology used in premium plumbing worldwide. The tank and jug are high-grade, food-safe plastic, certified to strict food-contact standards.
And the proof is in the output: the water this machine dispenses tested 100% free of microplastics.
We wrote about why we built it this way →Shipping, returns & warranty
- Free shipping · every order. Before 12pm AEST = same-day dispatch from Sydney
- 60-day home trial · live with it for two months; full refund, free return, no questions
- 2-year warranty · every part, replaced free
“Wow, wow, wow. I never knew water could taste so great.”
I have never been a health fanatic. I always eat and drink what I want to. I call water “the hard stuff” because for me it’s hard to drink.
Recently I decided to look into a water filter but, it had to be a bench top unit and, had to be reverse osmosis. I found the perfect one. Because it came with a 60 day return policy I decided to give it a try. Wow, wow, wow. I never knew water could taste so great. My coffee and tea is so much better. But it doesn’t stop there. I don’t need to use my kettle anymore for my morning coffee. I get the temperature I need for the cup size I need. No more wasting electricity.
Money well spent. Now I may be turning into a health fanatic.
Fill the back tank. The system does the rest.
Two tanks. One system. Zero effort. Fill the rear raw water tank from your tap. The 7-stage filtration system automatically purifies the water and fills the front pure water tank.
- 1 Fill the raw water tank · removable rear tank, fill at the tap or pour in
- 2 7-stage filtration runs automatically · PFAS, fluoride, bacteria, heavy metals removed
- 3 Pure water tank fills up · ready to dispense, store, or serve
Room temp to near-boiling. One button.
Six presets, one press. Room temp for drinking, 45°C and 55°C for warm drinks, 65°C for green tea, 85°C for instant coffee and preparing baby formula (Australian guidelines recommend at least 70°C), and 95°C for filter coffee and black tea. No kettle required.
Set the volume. Walk away.
Choose a preset (150ml, 300ml, or 1 litre), press once, and go do something else. The system stops itself. No overflow, no hovering over the machine. Or take control: press to start, press to stop, and pour exactly the amount you want.
Serve it. Store it. Drink it straight from the system.
The front pure water tank is completely removable. Take it out to serve at the table, pop it in the fridge for cold water, or simply dispense glasses directly from the system.
- Dispense directly · Fill glasses, bottles, or kettles straight from the system
- Remove & serve · Take the tank to the table, no pouring back and forth
- Store in the fridge · Pure, chilled water whenever you want it
Replace the cartridge in under 30 seconds.
No tools. No plumber. No mess. The all-in-one cartridge slides out and a fresh one clicks in. One cartridge per year. That's the only upkeep.
- Twist and pull · old cartridge slides straight out
- Click the new one in · you'll hear it lock into place
- Once per year · the only maintenance this system needs
80+ contaminants. Every one tested.
Independently tested by Equinox Labs and Laboratorio Echevarne. Where carbon filters reach their limit, the RO membrane physically excludes what's too small for any other home tech.
Fluoride
6 dissolved solids tested
Equinox Labs fed the machine water carrying 0.85 mg/L of fluoride, about what comes out of a fluoridated Australian tap. The water that came out measured below 0.01 mg/L, less than the lab's equipment can detect. Fluoride is a dissolved ion, far too small for carbon filters to catch. Stopping it takes the 0.0001 micron membrane.
PFAS / Forever chemicals
Five compounds, spiked above legal limits
The lab didn't test ordinary tap water. They deliberately spiked it to 3.28 µg/L of PFAS, many times worse than anything found in an Australian supply, and ran it through. It came out at 0.05 µg/L, below the Australian, EU and US drinking-water limits. Water that contaminated left the machine cleaner than most tap water starts.
Lead & heavy metals
12 metals tested
Equinox Labs ran water in at 0.059 mg/L of lead, six times the 0.01 mg/L guideline limit. What came out measured 0.000. Not reduced. Undetectable. Mercury tested the same: 100%, gone. There is no safe level of lead, which makes this the most important number on the page.
Microplastics
Physical exclusion
There's no lab number here, and we won't invent one. No standard test counts microplastics in output water. What we can tell you is geometry: the smallest microplastic is about 1 micron. The membrane's pores are 0.0001 microns, ten thousand times smaller. A microplastic particle cannot fit through.
Bacteria
E. coli, coliforms · Equinox Labs
Every organism tested came out at 100% removal. The smallest known bacterium is larger than the membrane's pores, so nothing living passes. This is the same physical barrier principle used in kidney dialysis.
Minerals, added back
Total Dissolved Solids
One number on this page is deliberately not >99%. After the membrane strips everything, Stage 7 passes the water through Swedish mineral rock, adding calcium, magnesium and potassium back in. That's why TDS reads 85%, and why the water drinks like mineral water instead of distilled nothing.
We filter water, not reviews.
Straight from Judge.me — the good, the grumpy, and the ones we've learned from.
Frequently asked questions
Seven, in one cartridge. Stage 1 is a fabric pre-filter that catches rust, sediment and particles down to 5 microns. Stage 2 is activated carbon fibre, which adsorbs chlorine, VOCs and pesticides. Stage 3 is a scale inhibitor that stops calcium and magnesium crystallising, protecting the membrane. Stage 4 is a second fabric layer that catches any loose carbon. Stage 5 is the heart: a reverse osmosis membrane with 0.0001 micron pores that physically excludes fluoride, PFAS, lead and bacteria. Stage 6 is a final carbon polish for taste. Stage 7 is Swedish Mineral Rock, which adds calcium, magnesium and potassium back so the water drinks like mineral water, not distilled. One swap a year covers all seven.
Buy with confidence. We'll back it up.
60 days to test it in your kitchen. 2 years on every part. Sydney-based support that actually answers.
We've offered this since 2021. We've never lost sleep over it.
And after the 2 years? Email hello@tappwater.com.au. We still help. Spare parts at cost, troubleshooting included.
The filtration tech behind the product comes from Bluewater Group, a Swedish water-technology company trusted in 30+ countries.